Skip to content
Teleport

SCU-Ecube

The Teleport can connect to SCU Ecube battery systems using Modbus TCP over ethernet. The battery system can be operated via Teleport to manage the available mode of operation:

  • Real Power Dispatch

Configuration

Modbus TCP

  1. Connect the ethernet cable between the ETH1 port of the Teleport and the LAN port on the battery’s LCD screen. If this port is already connected to the router, navigate to our appendix for generic instructions on how to integrate with a router. Make sure to note the IP of Teleport and the IP of the asset(s).

  2. On the LCD screen, enter the Administrator mode. Click on Settings - Communication parameters, check the default settings:

    • IP address: 192.168.0.232
    • Subnet mask: 255.255.255.0
    • Gateway: 192.168.0.1