Skip to content
Teleport

C-Battery

The Teleport can connect to C-Battery 60K systems with Golen inverters using Modbus RTU over RS485. The asset can be directly controlled via the Teleport to manage the available mode of operation:

  • Real Power Dispatch

Configuration

Modbus RTU over RS485

  1. Connect the serial cable between the serial port of the Teleport and the serial port of the meter.
  2. The default settings are:
    • Device address: 1
    • Baud rate: 9600
    • Data bits: 8
    • Stop bits: 1
    • Parity: None