CET-energrid

The Teleport can connect to CET Energrid battery inverter systems using Modbus RTU over RS485. The Teleport can connect to the CET Energrid products included in the list of supported models below:

Supported models

• Hercules PCS with Pegasus controller

The battery system can be directly controlled via Teleport to manage the available mode of operation:

• Real Power Dispatch

Modbus RTU over RS485

1. Connect the serial cable between the serial port of the Teleport and the serial port of the battery.
2. The default settings from the battery manual can be found below. Please let us know if you configure the battery with different settings:
   • Device address: 1
   • Baud rate: 19200
   • Stop bits: 1
   • Parity: even