Skip to content
Teleport

Intercel

The Teleport can connect to Intercel battery systems using Modbus TCP over ethernet (recommended) or Modbus RTU over RS485. The battery system can be directly controlled via Teleport to manage the available mode of operation:

  • Real Power Dispatch
Supported models
  • CESS 233-116
  • CESS 280-125
  • CESS 372
Supported properties

Supported properties

  • frequency
  • activePower
  • reactivePower
  • powerFactor
  • stateOfCharge
  • stateOfHealth
  • batteryStatus
  • energy.charged
  • energy.discharged
  • acCurrentMediumVoltage.phase.l1
  • acCurrentMediumVoltage.phase.l2
  • acCurrentMediumVoltage.phase.l3
  • acVoltageMediumVoltage.line.l1
  • acVoltageMediumVoltage.line.l2
  • acVoltageMediumVoltage.line.l3
  • batteryEnergyStorageSystems[].racks[].cellTemperature.max
  • batteryEnergyStorageSystems[].racks[].dcVoltage
  • batteryEnergyStorageSystems[].racks[].dcCurrent
  • threePhaseConnectionTypeHighVoltage

Unsupported properties

  • availableEnergy
  • availableActivePower.charge
  • availableActivePower.discharge
  • ratedEnergy
  • acCurrentMediumVoltage.line
  • acVoltageMediumVoltage.phase
  • availableReactivePower.inject
  • availableReactivePower.absorb
  • batteryEnergyStorageSystems[].roomTemperature
  • batteryEnergyStorageSystems[].stateOfCharge
  • batteryEnergyStorageSystems[].availableEnergy
  • batteryEnergyStorageSystems[].cellTemperature.min
  • batteryEnergyStorageSystems[].cellTemperature.max
  • batteryEnergyStorageSystems[].racks[].cellVoltage.min
  • batteryEnergyStorageSystems[].racks[].cellVoltage.cellIdMin
  • batteryEnergyStorageSystems[].racks[].cellVoltage.max
  • batteryEnergyStorageSystems[].racks[].cellVoltage.cellIdMax
  • batteryEnergyStorageSystems[].racks[].cellVoltage.average
  • batteryEnergyStorageSystems[].racks[].cellTemperature.min
  • batteryEnergyStorageSystems[].racks[].cellTemperature.cellIdMin
  • batteryEnergyStorageSystems[].racks[].cellTemperature.cellIdMax

Configuration

Modbus TCP over ethernet

The default communication settings for the Intercel battery are listed below. If any of these setting are changed, please notify us so we can reconfigure the Teleport accordingly.

Default communication settings:

  • Port: 502
  • IP adress: 192.168.1.161