Jinko
The Teleport can connect to Jinko battery systems using Modbus TCP over ethernet. The battery system can be operated via Teleport to manage the available mode of operation:
- Real Power Dispatch
Configuration
Modbus TCP
-
Connect the ethernet cable between the ETH1 port of the Teleport and the Ethernet port of the battery. If this port is already connected to the router, navigate to our appendix for generic instructions on how to integrate with a router. Make sure to note the IP of Teleport and the IP of the asset(s).
-
The default settings for the Jinko battery system are:
- IP address:
192.168.4.98or192.168.4.99(SCU and LC respectively) - Port:
2404
- IP address: