Bredenoord

The Teleport can connect to Bredenoord generator using Modbus TCP over ethernet. The generator is controlled using dry contact signals. More information about scheduling commands for generators is available in the API documentation.

Note

The Teleport can only turn the generator on or off. It does not support control of the baseload. A setpoint value greater than 0 closes the dry contact and starts the generator while a setpoint value of 0 opens the dry contact and stops the generator.

Warning

A field test is still required for this integration. Functionality may not be fully validated yet.

Supported properties

• status
• activePower.l1
• activePower.l2
• activePower.l3
• activePower.sum
• reactivePower.l1
• reactivePower.l2
• reactivePower.l3
• reactivePower.sum
• apparentPower.l1
• apparentPower.l2
• apparentPower.l3
• apparentPower.sum
• current.phase.l1
• current.phase.l2
• current.phase.l3
• voltage.line.l1
• voltage.line.l2
• voltage.line.l3
• voltage.phase.l1
• voltage.phase.l2
• voltage.phase.l3
• frequency
• powerFactor
• generatedEnergy
• engineSpeed
• temperature.oil
• temperature.coolant
• fluids.fuelLevel
• fluids.oilPressure
• fluids.coolantPressure
• numberOfStarts
• engineRunTime
• alarms[]

Unsupported properties

• current.line
• temperature.ambient
• fluids.coolantLevel