IME

Teleport can connect to IME Conto D4 meters. You can connect using Modbus RTU using the RS485 serial interface.

Supported models

• IME Conto D4-Pd
• IME Conto D4-Pd MID
• IME Conto D4-Pt
• IME Conto D4-Pt MID

Modbus RTU over RS485

1. Connect the serial cable between the serial port of the Teleport and the serial port of the meter.

2. Set the communication parameters:

   • Press the SET button for 3 seconds to access the setup parameter display Teleport is configured to use the following default Modbus interface configuration of the meter (let us know if you use a custom configuration):

     • Device address: 1
     • Baud rate: 9600
     • Parity: none