Asterix

The Teleport can connect to Asterix battery systems using Modbus TCP over ethernet. The asset can be directly controlled via the Teleport to manage the available mode of operation:

• Real Power Dispatch

Note

The resolution of the active power setpoint is 1 kW.

Supported models

• Asterix A-200

Supported properties

• stateOfCharge
• availableActivePower.charge
• availableActivePower.discharge
• activePower
• availableEnergy
• frequency
• reactivePower
• powerFactor
• stateOfHealth
• energy.charged
• energy.discharged
• acCurrentMediumVoltage.phase.l1
• acCurrentMediumVoltage.phase.l2
• acCurrentMediumVoltage.phase.l3
• acVoltageMediumVoltage.phase.l1
• acVoltageMediumVoltage.phase.l2
• acVoltageMediumVoltage.phase.l3
• batteryEnergyStorageSystems[].stateOfCharge
• batteryEnergyStorageSystems[].availableEnergy
• batteryEnergyStorageSystems[].racks[].stateOfCharge
• batteryEnergyStorageSystems[].racks[].dcVoltage
• batteryEnergyStorageSystems[].racks[].dcCurrent
• batteryStatus

---

Unsupported properties

• acCurrentMediumVoltage.line
• acVoltageMediumVoltage.line
• availableReactivePower.inject
• availableReactivePower.absorb
• ratedEnergy
• batteryEnergyStorageSystems[].roomTemperature
• batteryEnergyStorageSystems[].cellTemperature.min
• batteryEnergyStorageSystems[].cellTemperature.max

Note

If solar (PV) is connected to the DC side of the same PCS as the battery, the Teleport control is limited to the AC output power. This may lead to unintended curtailment of PV. Please check the OEM documentation on the exact consequences of this configuration.