Skip to content
Teleport

OX Power

The Teleport can connect to Gotion battery systems using Modbus RTU over RS485. The battery system can be directly controlled via Teleport to manage the available mode of operation:

  • Real Power Dispatch
Supported properties

Supported:

  • frequency
  • activePower
  • reactivePower
  • stateOfCharge
  • stateOfHealth
  • batteryStatus
  • acCurrentMediumVoltage.phase.l1
  • acCurrentMediumVoltage.phase.l2
  • acCurrentMediumVoltage.phase.l3
  • acVoltageMediumVoltage.phase.l1
  • acVoltageMediumVoltage.phase.l2
  • acVoltageMediumVoltage.phase.l3
  • batteryEnergyStorageSystems[].racks[].dcVoltage
  • batteryEnergyStorageSystems[].racks[].dcCurrent

Unsupported:

  • powerFactor
  • availableEnergy
  • availableActivePower.charge
  • availableActivePower.discharge
  • energy.charged
  • energy.discharged
  • ratedEnergy
  • availableReactivePower.inject
  • availableReactivePower.absorb
  • batteryEnergyStorageSystems[].stateOfCharge
  • batteryEnergyStorageSystems[].availableEnergy
  • batteryEnergyStorageSystems[].roomTemperature
  • batteryEnergyStorageSystems[].cellTemperature.min
  • batteryEnergyStorageSystems[].cellTemperature.max

Configuration

Modbus RTU over RS485

  1. Connect the serial cable between the serial port of the Teleport and the serial port of the battery.
  2. The default settings from the battery manual can be found below. Please let us know if you configure the battery with different settings:
    • Device address: 1
    • Baud rate: 9600
    • Stop bits: 1
    • Parity: None