Skip to content
Teleport

FENECON

The Teleport can connect to the FENECON products included in the list of supported models below.

Supported models
  • Commercial 50
  • Commercial 92
  • Commercial 92 Cluster
  • Industrial S
  • Industrial M
  • Industrial L
  • Industrial XL
  • Other products supporting the Modbus FEMS App.

The asset can be controlled via the Teleport to set the following operations.

  • dispatchPower - to control active power

The properties listed below are supported by the FENECON products, assuming the product has the properties availabe on its Modbus interface.

Supported properties
  • activePower
  • availableActivePower.charge
  • availableActivePower.discharge
  • batteryStatus
  • energy.charged
  • energy.discharged
  • powerFactor1
  • reactivePower
  • stateOfCharge
  • batteryEnergyStorageSystems[].cellTemperature.min
  • batteryEnergyStorageSystems[].cellTemperature.max
  • batteryEnergyStorageSystems[].stateOfCharge
  • batteryEnergyStorageSystems[].racks[].cellTemperature.min
  • batteryEnergyStorageSystems[].racks[].cellTemperature.max
  • batteryEnergyStorageSystems[].racks[].cellVoltage.max
  • batteryEnergyStorageSystems[].racks[].cellVoltage.max

Configuration

  1. Connect an Ethernet cable between the asset and either a router or an Ethernet port of the Teleport. If connected via a router, please navigate to our appendix for more instructions on how to integrate with a router.
  2. Install the Modbus/TCP write access FEMS App, in the OpenEMS Apps menu under Settings. See the FENECON documentation for details.
  3. In the Modbus/TCP write access FEMS App, click on EDIT APP to access the app’s settings. The API timeout is used to terminate the setpoint from the Teleport in case of a communication loss between the Teleport and the asset. Validate this option is set to 10 seconds or higher.

Footnotes

  1. Calculated from the activePower and reactivePower as this property is not directly available from the asset. ↩