Skip to content
Teleport

HollandMalt

The Teleport can connect to the HollandMalt e-boiler.

We can read out the following properties for both HT and LT buffer seperately:

  • status (called batteryStatus)
  • stateOfCharge
  • availableActivePower.charge
  • activePowerSetpoint

We read out the following properties aggregated over both buffers:

  • energy.charged
  • activePower
  • availableEnergy

Modbus TCP over ethernet

  1. Connect the ethernet cable between the ETH1 port of the Teleport and one of the available ethernet ports of the HollandMalt e-boiler. If the ethernet port of the asset is already occupied (e.g. connected to a router), navigate to our appendix for instructions on how to integrate with a router.