Skip to content

SMA meter (via SMA Datamanager)

Teleport can connect to SMA meter power meters via the SMA Datamanagers. Please follow the instructions on how to connect the SMA Datamanager to the Teleport here. We expect that the meter is already connected to the SMA datamanager according to product specifications which that part is out of our scope.

Configuration

Allocating Unit ID for Meter via Web UI

This guide outlines the steps to allocate a Unit ID to a meter using the local Web UI of the Datamanager.

Steps to Allocate Unit ID

  1. Access the Web UI of the Datamanager using its IP address.
  2. Log into the user interface.
  3. On the top bar, click Select Device and choose the Datamanager from the drop-down menu.
  4. On the left sidebar, navigate to ConfigurationExternal communication.
  5. Under Modbus server, go to Allocation of the Unit ID.
  6. Click the plus (+) button to add a new device, and select the meter.
  7. A new entry will appear; the default Unit ID will be 10.
  8. Click Save to confirm and store the new allocation.

Make sure to verify communication with the meter after completing these steps.