Skip to content
Teleport

PeerGen

The Teleport can connect to the PeerGen Battery Energy Storage System (BESS) through the LC cabinet. Teleport can manage the following mode(s) of operation:

  • Real Power Dispatch
Supported properties

Supported:

  • frequency
  • activePower
  • reactivePower
  • powerFactor
  • availableEnergy
  • stateOfCharge
  • batteryStatus
  • acCurrentMediumVoltage.phase.l1
  • acCurrentMediumVoltage.phase.l2
  • acCurrentMediumVoltage.phase.l3
  • acVoltageMediumVoltage.line.l1
  • acVoltageMediumVoltage.line.l2
  • acVoltageMediumVoltage.line.l3
  • acVoltageMediumVoltage.phase.l1
  • acVoltageMediumVoltage.phase.l2
  • acVoltageMediumVoltage.phase.l3
  • batteryEnergyStorageSystems[].stateOfCharge
  • batteryEnergyStorageSystems[].availableEnergy
  • batteryEnergyStorageSystems[].cellTemperature.min
  • batteryEnergyStorageSystems[].cellTemperature.max
  • batteryEnergyStorageSystems[].acVoltageLowVoltage.line.l1
  • batteryEnergyStorageSystems[].acVoltageLowVoltage.line.l2
  • batteryEnergyStorageSystems[].acVoltageLowVoltage.line.l3
  • batteryEnergyStorageSystems[].acVoltageLowVoltage.phase.l1
  • batteryEnergyStorageSystems[].acVoltageLowVoltage.phase.l2
  • batteryEnergyStorageSystems[].acVoltageLowVoltage.phase.l3
  • batteryEnergyStorageSystems[].acCurrentLowVoltage.phase.l1
  • batteryEnergyStorageSystems[].acCurrentLowVoltage.phase.l2
  • batteryEnergyStorageSystems[].acCurrentLowVoltage.phase.l3
  • batteryEnergyStorageSystems[].roomTemperature
  • batteryEnergyStorageSystems[].racks[].stateOfCharge
  • batteryEnergyStorageSystems[].racks[].dcCurrent
  • batteryEnergyStorageSystems[].racks[].dcVoltage
  • batteryEnergyStorageSystems[].racks[].cellTemperature.min
  • batteryEnergyStorageSystems[].racks[].cellTemperature.cellIdMin
  • batteryEnergyStorageSystems[].racks[].cellTemperature.max
  • batteryEnergyStorageSystems[].racks[].cellTemperature.cellIdMax
  • batteryEnergyStorageSystems[].racks[].cellVoltage.min
  • batteryEnergyStorageSystems[].racks[].cellVoltage.cellIdMin
  • batteryEnergyStorageSystems[].racks[].cellVoltage.max
  • batteryEnergyStorageSystems[].racks[].cellVoltage.cellIdMax
  • batteryEnergyStorageSystems[].racks[].cellVoltage.average

Unsupported:

  • availableActivePower.charge
  • availableActivePower.discharge
  • energy.charged
  • energy.discharged
  • stateOfHealth
  • ratedEnergy
  • acCurrentMediumVoltage.line
  • availableReactivePower.inject
  • availableReactivePower.absorb
  • batteryEnergyStorageSystems[].acCurrentLowVoltage.line
  • batteryEnergyStorageSystems[].racks[].rackStatus

Configuration

Modbus TCP

  1. Connect the ethernet cable between the ETH1 port of the Teleport and the Ethernet port of the battery. If this port is already connected to the router, navigate to our appendix for generic instructions on how to integrate with a router. Make sure to note the IP of Teleport and the IP of the asset(s).

  2. The default settings for the Peergen battery system are:

    • IP address: 192.168.1.101
    • Port: 502