Kehua

The Teleport can connect to the Kehua products included in the list of supported models below.

Supported models

• BCS1725K-B-HUD series
• NXPCS series
• BCS200K-B-HM series

The asset can be controlled via the Teleport to set the following operations.

• dispatchPower - to control active power setpoint

Warning

A field test is still required for this integration. Functionality may not be fully validated yet.

Note

• The resolution of the active power setpoint is 1 kW.

1. Connect an Ethernet cable between the asset and either a router or an Ethernet port of the Teleport. If connected via a router, please navigate to our appendix for more instructions on how to integrate with a router.
2. Go to the Web UI of the battery, in basic settings, change power soft start rate to a reasonable high number, e.g. 50 (kW/s).