Skip to content
Teleport

Indrivetec

The Teleport can connect to the Indrivetec BESS system using Modbus TCP over ethernet.

Setpoint operations

The asset can be controlled via the Teleport to set the following operations.

  • dispatchPower - to control active and/or reactive power setpoint, with a resolution of 0.1 kW.

Supported & Unsupported properties details

Properties
Supported properties
Supported properties:
  • activePower
  • reactivePower
  • powerFactor
  • batteryStatus
  • frequency
  • stateOfCharge
  • stateOfHealth
  • availableEnergy
  • availableActivePower.charge
  • availableActivePower.discharge
  • availableReactivePower.absorb
  • availableReactivePower.inject
Unsupported properties:
  • energy.charged
  • energy.discharged
  • ratedEnergy
  • batteryEnergyStorageSystems[]
  • batteryEnergyStorageSystems[].racks[]

Modbus TCP over ethernet - configuration

  1. Connect an Ethernet cable between the asset and either a router or an Ethernet port of the Teleport. If connected via a router, please navigate to our appendix for more instructions on how to integrate with a router.

  2. The default IP address is 192.0.2.230 and Modbus Port is 502. Please inform us of the chosen IP address if a different one is set from the default.