Skip to content
Teleport

Refurb

The Teleport can connect to the Refurb products included in the list of supported models below.

Supported models
  • cBESS10
  • Monet series (modbus protocol V1.0.7 and V2.0.8)

Monet series - Supported & Unsupported properties

Supported properties
Supported properties:
  • batteryStatus
  • energy.charged
  • energy.discharged
  • frequency
  • activePower
  • reactivePower
  • powerFactor
  • stateOfCharge
  • stateOfHealth
  • batteryEnergyStorageSystems[].cellTemperature.min
  • batteryEnergyStorageSystems[].cellTemperature.max
  • batteryEnergyStorageSystems[].stateOfCharge
  • batteryEnergyStorageSystems[].roomTemperature
  • batteryEnergyStorageSystems[].acVoltageLowVoltage.line.l1
  • batteryEnergyStorageSystems[].acVoltageLowVoltage.line.l2
  • batteryEnergyStorageSystems[].acVoltageLowVoltage.line.l3
  • batteryEnergyStorageSystems[].acCurrentLowVoltage.phase.l1
  • batteryEnergyStorageSystems[].acCurrentLowVoltage.phase.l2
  • batteryEnergyStorageSystems[].acCurrentLowVoltage.phase.l3
  • batteryEnergyStorageSystems[].racks[].dcVoltage
  • batteryEnergyStorageSystems[].racks[].dcCurrent
Unsupported properties:
  • availableEnergy
  • ratedEnergy
  • availableActivePower.charge
  • availableActivePower.discharge
  • availableReactivePower.inject
  • availableReactivePower.absorb
  • auxiliaryPower.active
  • auxiliaryPower.reactive
  • batteryEnergyStorageSystems[].availableEnergy
  • batteryEnergyStorageSystems[].acVoltageLowVoltage.phase
  • batteryEnergyStorageSystems[].acCurrentLowVoltage.line

cBESS10 - Supported & Unsupported properties

Supported properties
Supported properties:
  • batteryStatus
  • energy.charged
  • energy.discharged
  • activePower
  • reactivePower
  • stateOfCharge
  • availableEnergy
  • ratedEnergy
  • availableActivePower.charge
  • availableActivePower.discharge
Unsupported properties:
  • frequency
  • stateOfHealth
  • availableReactivePower.inject
  • availableReactivePower.absorb
  • powerFactor

The asset can be controlled via the Teleport to set the following operations.

  • dispatchPower - to control active power

Configuration

  1. Connect an Ethernet cable between the asset and either a router or an Ethernet port of the Teleport. If connected via a router, please navigate to our appendix for more instructions on how to integrate with a router.